Project Description
20W 30W LED Wall Pack Light Fixtures 2700K-5000K
Power | 20W |
Model | BB-RSD-20W-C2 |
Luminous Flux | 18000LM |
Equal | HPS75W |
Cover | PC cover |
Light Source | SMD LED |
Luminous Efficacy | 90lm/w |
Operation Temp | -40 to +45℃ |
CCT | 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW |
CRI | >85 |
Life Span | 50,000 hours at 25℃ |
Driver | UL Listed power supply |
Dimming | No |
Sensor | No sensor, Photocell sensor, PIR sensor optional. |
Voltage | 100-277VAC/50-60Hz |
Beam Angle | 120° |
PF | >0.95 |
IP | 65 |
installtion way | Wall mount |
Warranty | 5 Years |
Product size | 147*215*80mm |
application | Wall outside of the House |
Power | 30W |
Model | BB-RSD-30W-C2 |
Luminous Flux | 2700lm |
Equal | HPS100W |
Cover | PC cover |
Light Source | SMD LED |
Luminous Efficacy | 90lm/w |
Operation Temp | -40 to +45℃ |
CCT | 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW |
CRI | >85 |
Life Span | 50,000 hours at 25℃ |
Driver | UL Listed power supply |
Dimming | No |
Sensor | No sensor, Photocell sensor, PIR sensor optional. |
Voltage | 100-277VAC/50-60Hz |
Beam Angle | 120° |
PF | >0.95 |
IP | 65 |
installtion way | Wall mount |
Warranty | 5 Years |
Product size | 147*215*80mm |
application | Wall outside of the House |
1. Made by: Bbier Plant (Factory )
2. Beam angle:120 degrees.
3. Aluminum die-casting heat sinks is good for heat dissipation.
4. It’s major to replace the conventional wallpack light.
5. Green, energy saving, long and reliable life of 50,000 hours.
6. No RF interference, No IR/UV radiation ,no mercury pollution.
7. Wide colour availability in degrees Kelvin(K),2700-6700K.
8. Streamline exterior design, beautiful appearance.
9. Environment friendly ,energy saving (70~80%).
10. Special circuit design, each LED work separately,
avoiding the single broken LED influence problem.
Project’s Place: USA
Project’s Time: MARCH, 2014
Application: Wall Street
Products: New Type LED Wallpack 35W To 100W
Bbier 60W LED Wallpack Light / DLC depending, 60W LED Wallpack-we designned it mainly replace the traditional wallpack fixture take off the traditioanl ballast. then screw the led plate to wallpack fixture. so that make the traditional wallpack to be LED application directly.
RELATED PRODUCTS


60Watts-LED-UFO-High-Bay-Lighting-5000K


200watt-led-ufo-high-bay-fixtures-26000lm-5000k


200W-LED-UFO-High-Bay-Lighting-5000K-26000LM


240W-UFO-LED-High-Bay-Lights-Wholesale-5000K